FLOAT - CUM - BOOST CHARGER

Technical Specifications

Input: • Mains :   230V (1F) / 415V (3F) ±15%, 50 Hz ± 6% AC.
• Battery :   45 to 53.75 Volts. DC
 
Output: • Load :   Selectable between 48 to 56 Volts DC - Typical
• Charger :   Boost Mode : 57.6 Volts
      Float Mode : 51.6 Volts
• Regulation :   ± 1.5 Volts
• Ripple :   < 100 mV (peak-to-peak) with battery
• Psophometric Noise :   < 2 mV with battery, on speech load (800 Hz)
• Over-all Efficiency :   > 70% under all conditions
• Visual Indications :   Mains ON, High / Low input voltage cutout, High / Low charger voltage cutout,
  batter Boost / Float mode, Battery Low
• Audio Alarm :   Battery Low and System Failure.

Optional Features

  • Facility for manual extended boost charging at 64.8 Volts.
  • Audio / Visual Alarm for:
    • Current change-over to battery (on mains failure)
    • Overload tripping
  • Custom-built panel design / display and protections.
  • Colour Scheme suitable to the exchange.
  • Any different output voltage or current as per customer's requirement.

Available Range

Model No Total Output Current Load Current Charging Current
RC 5006 6A 3A 3A
RC 5010 10A 5A 5A
RC 5012 12A 3A / 9A 9A / 3A
RC 5015 15A 9A 6A
RC 5020 20A 10A 10A
RC 5025 25A 15A 10A
RC 5030 30A 20A / 15A 10A / 15A
RC 5035 35A 20A 15A
RC 5065 65A 35A 30A

SUVIK reserves the right to amend design and specifications without notice as continuous efforts are made to improve products performance...